iMAX B6AC V2 Charger

New iMAX B6AC V2 Charger

Shipping

Purchase 2 or more items at once better save shipping cost!

This is a Genuine, Authentic, Original B6AC V2 Charger from SkyRC, a leader in reliability and functionality.

The charger includes the Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity.


Lithium Battery Meter

Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell.


Internal Resistance Meter

Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them.


Terminal Voltage Control

The voltage at which the charger cuts off the charge to each cell can be adjusted.

  LiPo 4.18V-4.25V (Default 4.20V)

  LiIo 4.08V-4.20V (Default 4.10V)

  LiFe 3.58V-3.70V (Default 3.60V)


PC Connectivity

You can monitor pack voltage, cell voltage and other data during the charging process. View charge data in realtime graphs. You can also control charging functions and update the firmware on the charger when new updates come out. The software (PC Only) can be downloaded from SKYRC's website for free.


Features:

High 6.0Amp Charge Rate

Balance Charges & Balance Discharges LiPo, LiON, LiFe (1S-6S cells)

Storage Mode to Preserve Battery Longevity

Charges NiMh, NiCd (1-15 cells)

AUTO charge mode for NiMh

Charges Lead-Acid (2V-20V)

Many Safety Features

Capacity Cutoff

Time Limit Cutoff

Temperature Cutoff

10 Battery Memory Storage Settings

NiMh Cycling, Charge>Discharge, up to 5 times to refresh battery life

User definable charge rates from 0.1 amps to 6.0 Amps

50 Watt max output. Charge Amperage auto adjusts depending on battery voltage. (i.e. Charge rate for 3S LiPo: 50W/11.1V = 4.5A max charge rate)

Balance Port Built In (Balances 2S-6S Batteries) (Uses Align/E-Flite/CSRC style Balance Plug Port) (Thunder Power adapter available separately, GTP1005)

Comes with 5 different charging plugs

  1. Dean's Plug
  2. Futaba / Receiver
  3. JST
  4. XT60
  5. Alligator Clip

Menu Options:

LiPo, LiIo, LiFe

  • Balance Charge (Balances cells inside of battery for optimal performance & safety)
  • Charge
  • Fast Charge
  • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
  • Discharge

NiMh, NiCd

  • Charge
  • Auto Charge (Set the upper charge amperage and the charger does the rest)
  • Discharge w/ adjustable terminal voltage
  • Re-Peak (Top the battery off 1, 2, or 3 times repeatedly)
  • Cycle (Charge>Discharge or Discharge>Charge. 1-5 times)

Pb (Lead Acid batteries such as the battery in your car)

  • Charge
  • Discharge

Battery Meter (Shows the voltage of each cell in teh lithium pack. Press INC button to see the Total Voltage, Highest Voltage and Lowest Voltage)

Internal Resistance Tester (Shows each cells internal resistance. Press INC button to see the Total Resistance, Highest Resistance and Lowest Resistance)

System Settings

  • Safety Timer (The charger will stop charging after the specified time. ON 1-720min adjustable, OFF)
  • Capacity Cutoff (The charger will stop charging once it has reached the specified mAh. ON 100-50,000mAh, OFF)
  • Temp Cutoff (Requires optional Temperature Probe. Charger will stop the charging if specified temperature is reached. ON 20C/68F-80C/176F, OFF)
  • Temperature Unit (Choose which temperature units are displayed)
  • Rest Time (This allows the battery to rest and cool down between cycles. 1-60min)
  • NiMh & NiCd Sensitivity (Determines how the battery is detected to be fully charged. Default of 4mV/cell, 5mV-15mV/cell adjustable)
  • Key Beep & Buzzer (Turn the sounds on or off for button pushes and charger tones)
  • Input Power Low Voltage Cutoff (If the DC power supplied tot he charger falls below a certain threshold, the charger will stop charging. 10.0-11.0V)
  • Load Factory Settings
  • Version (Indicates the hardware and firmware versions)
  • Serial Number (Indicates the charger's unique serial number issued by SkyRC)

Warranty:

SkyRC offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.


Operating Voltage Range: AC 100 - 240V / DC 11 - 18V

Circuit Power: Max. 50W for charging, Max. 5W for discharging 

Charge Current Range: 0.1 - 6.0A (Amperage auto adjusts to 50W max based on battery voltage) (50W / Battery Voltage = Max Charge Amperage)

Discharge Current Range: 0.1 - 2.0A (5 Watts)

Current Drain for Balancing: 300mAh/cell 

NiCd/NiMH Battery Cell Count: 1 - 15 Cells 

Lithium Battery Cell Count: 1 - 6 Series 

Pb Battery Voltage: 2 to 20V 

Weight: 626g

Dimensions: 135mm x 144mm x 36mm



iMAX B6AC V2 Charger iMAX B6AC V2 Charger

Write a review

Please login or register to review

All product shipping form China

 

1. The post airmail or Hongkong Post airmail limit weight is 2kg, if the package weight more than 2kg, the shipping way will disable. if other shipping mothed can't arrived your country or the goods composed by the small items. please feel free contact us, we could offer you best way for the order.

 

2. The China Post EMS or Hongkong Post EMS limit weight is 30kg. It will take 1-3 weeks to you country.

 

3.If you want use DHL, UPS, FEDEX, please contact us before your payment. 

  • Views: 6500
  • Brand: Skyrc
  • Product Code: GENUINE B6AC V2
  • Availability: In Stock
10 Product(s) Sold
  • $37.92

Tags: GENUINE, AUTHENTIC SKYRC, iMAX B6AC V2, 6Amp ACDC, LiPo NiMh Battery Balance Charger